Ⅰ.Torque Bar For Brake Shoe
Description:
The torque bar for brake shoe is actually a transmission shaft, which should refer to the processing standard of shaft parts, the material is 40Cr, and the part that fits the hole should be quenched at medium frequency, the hardness should not be less than HRC40-50, the shaft diameter should have a tolerance zone with the hinged hole of the side plate, the dimensional accuracy is Φ25 (-0.033), and the coaxiality of the shaft on both sides is required to be ≦0.015mm.
Usage:
Our torque bar for brake shoe is a crucial component in ensuring safe and effective braking performance.This product is designed for brake shoe.
Key Features and Benefits:
1. Our torque bars are made of premium materials that provide unmatched strength and reliability for braking mechanisms;
2. Our torque rods have extremely high dimensional accuracy;
3. Gradually improve the technology, better adapt to the working environment.
Ⅱ.Leaf Springs For Brake Shoe
Description:
Leaf Springs For Brake Shoe is also a separating spring, the spring material is 55SiMn, the chemical composition should conform to: the corresponding material chemical composition in the GB3077-88 standard; Non-Metallic inclusions: according to the GB10561-2005 rating, brittle and plastic inclusions are not more than 1.5 grades; The depth of the decarburization layer: the decarburization layer on the steel surface is not allowed to exceed 0.01mm on one side, and 0.02mm on both sides; Flexible in accordance with GB/T23925-2009.
Usage:
The main function is that in the clutch separation action, after the air bag pressure is relieved, the spring disc will return to the bending state and the brake shoe will be completely separated from the friction drum wheel, so that the ball mills will stop running.
Key Features and Benefits:
1. The spring toughness is high, pressure deformation, after lifting can quickly restore the original bending state;
2. High fatigue strength, working state of long-term flattening without deformation;
3. Friction resistance, the middle contact surface is durable and not broken.
Ⅲ.Brake-Shoe
Description:
Brake-Shoe QL665, QL875, QL1000, LQ800...
Referring to the standard JB/T10999-2010 for pneumatic clutches for ball mills, the standard for casting aluminum alloy GBT1173-1995, the brake-shoe bracket is made of ZL107 aluminum alloy die-casting, which has sufficient strength and good toughness, and the mechanical properties should not be less than: tensile strength 275Mpa, elongation 3.5%, material hardness (HB) 90.
A critical component in the operation of these pneumatic clutches is the brake-shoe. The brake-shoe is responsible for stopping the clutch when it needs to be disengaged. If the brake-shoe is not disengage properly, the clutch may continue to engage, causing damage to the mill and potentially injuring workers.
Usage:
This product is used for ball mills clutch friction plate supporting parts, also known as friction plate base, bearing radial pressure and transfer rotational torque.
Key Features and Benefits:
1. High compressive and fatigue strength;
2. Smooth engagement:When operating the equipment, the brake shoe holds the drum wheel within 4-7 seconds under the action of air pressure, and then realizes the engagement state;
3. Quick stop: WHEN the operation stops the operation of the equipment, the brake shoe is kept away from the drum wheel to achieve the separation state;
4. Short joint time:It will not cause abnormal wear and overheating failure.
Ⅳ.Brake Lining For Brake Shoe
Description:
The friction material is asbestos resin brake pads, which are more wear-resistant and high-temperature resistant than asbestos rubber brake belts. Under the same conditions of use, the service life of asbestos resin brake strips is twice that of asbestos rubber brake belts.
Usage:
Parts on the shoe, brake linings are consumable surfaces in braking systems, such as drum brakes and disc brakes used in transport vehicles.
Key Features and Benefits:
1. High dynamic friction coefficient;
2. Excellent high temperature resistance;
3. Consumable parts, replaceable according to wear and tear.
Why choose us?
1. More than 25 years of production experience, to product quality as the life of the business philosophy;
2. Have complete sets of production equipment and technical support;
3. Have a high-quality technical service team and sincere after-sales service;
4. Registered capital: $7,000,000.
Hot Tags: Clutch Kit Brake Shoe Assembly, suppliers, manufacturers, factory, wholesale, buy, price, in stock, for sale, free sample, made in China, mining clutch for mining operation transformation improvement, mining clutch for mining machinery maintenance improvement, mining clutch for mining operation continuity assurance, mining clutch for mining operation management, mining clutch for mining operation synchronization improvement, mining clutch for mining work organization optimization






