Product Description
1. Item: grain refiner for aluminum trims
2. Material: low-Ferrum aluminum ingots; K2TiF6 (potassium fluotitanate); C powder
3. Formation of AlTiC: TiAl3; TiC
4. Shape of TiAl3: block and rod shape,mainly rod shape
5. Size of TiAl3:<200μm
6. Nucleation particle: TiC
7. Structure of TiC: face-centered cubic
8. Size of TIC: <2μm
9. Lattice constant of TiC: 0.4329nm
10. Density of TiC: 4.93g/cm3
11. Crystal density of TiC: 74%
12. Nucleation efficiency of TiC : 50:1 on average
13. Suggested addition rate: 2‰
14. Average grain size after refined by AlTiC: <130μm
15. Chemical components:
16. Application: EC grade aluminum wire rod, aluminum cans alloy for body/lids, automotive trim parts, 7XXX alloys which contains Zr, Cr etc.
|
Specification |
Chemical components of Al-Ti-C (%) |
|||||||
|
Ti |
C |
Fe |
Si |
V |
Other each |
Other total |
Balance |
|
|
AlTi3C0.15 |
2.6-3.4 |
0.08-0.22 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
|
AlTi5C0.18 |
4.5-5.5 |
0.13-0.23 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
|
AlTi5C0.2 |
4.5-5.5 |
0.15-0.25 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
|
AlTi5C0.2Sc |
4.5-5.5 |
0.15-0.25 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
|
AlTi5C0.2La |
4.5-5.5 |
0.15-0.25 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |

Adding Process

Adding Instruction
1) Ensure the product is clean and dry before adding;
2) Adding temperature: 700-760 ℃;
3) Adding amount per ton of aluminum: 2 kg, or adjusted by your experiment data according to the real situation;
4) Add it in 5 to 20 minutes before casting;
5) Adding method: remove the scum, evenly disperse the product into the aluminum molten liquid, stir evenly, and let it stand for 5-10 minutes to cast, or add it online by wire feeding machine;
FAQ
Q: Are you trading company or factory ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3 workdays if the goods are in stock or 10-15 workdays if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free but do not pay the cost of freight.
Q: What is your terms of payment ?
A: 50% deposit before production,balance before delivery.
Refinement Data

Coclusion: It could be seen from above data, the AlTi5C0.2 from Fengyue S&T has better refinement capability and more homogeneous refined grain size distribution, than the AlTi5B1 imported from Spanish.
1. Even at lower addition ratio 0.65‰, the refinement capability of AlTi5C0.2 is better than AlTi5B1 at higher addition ratio 1.08‰. Although the corresponding grain size gap is greater, but the related actual grain size is smaller, as 147.78μm comparing with 164.71μm. And, that means AlTi5C0.2 brings more smaller grain sizes.
2. At the same addition ratio 1.08‰, the refinement capability of AlTi5C0.2 is higher over 19% than AlTi5B1, the homogeneity of refined grain size distribution is higher over 23%, and the actual refined grain sizes are smaller, too.
Product Pictures

Hot Tags: grain refiner for aluminum trims, suppliers, manufacturers, factory, wholesale, buy, price, in stock, for sale, free sample, made in China, AlTiC For Aluminum Billet, aluminum titanium carbon environmental impact, aluminum titanium carbon footprint, aluminum titanium carbon drilling, aluminum titanium carbon for fabrication, aluminum titanium carbon consumer

