Analysis equipment
1. Optical microscope: Olympus DSX50
2. SEM: MIRA3 TESCAN

Fig.1 Metallographic analysis results




Fig.2 Scanning analysis results
Table 1 EDS component analysis
|
Element |
Weight % |
|
Al |
95.5 |
|
Ti |
4.5 |
Conclusion:
Through the above metallographic and scanning analysis results, it can be found that the distribution of TiAl3 in the refiner is relatively dispersed, mainly in the form of square rod, and the distribution of fine nucleating particles is very dispersed, and there is no agglomeration phenomenon.
