What Factors Affect the hardness and growth rate of the oxide film

May 05, 2023 Leave a message

Whether a high-quality hard oxide film can be formed on the surface of aluminum and aluminum alloys mainly depends on the concentration of the electrolyte, temperature, current density, and the composition of the raw materials.

 

What factors affect the hardness and growth rate of the oxide film:

When sulfuric acid electrolyte is used for hard anodizing, it is generally within the concentration range of 10% to 30%. When the concentration is low, the hardness of the oxide film is high, especially for pure aluminum, but for aluminum alloys with higher copper content (CY12) exception. Because aluminum alloys with higher copper content are prone to produce CuAl2 compounds, this compound dissolves faster during oxidation, and it is easy to burn aluminum parts. Therefore, it is generally not suitable to use low-concentration sulfuric acid electrolyte. It must be oxidized in high concentration (H2SO4 at 300~400g/L) or treated by AC and DC superposition method.

 

The temperature of the electrolyte has a great influence on the wear resistance of the oxide film. Generally speaking, if the temperature drops, the wear resistance of the anodic oxide film of aluminum and aluminum alloys will increase, which is caused by the decrease in the dissolution rate of the electrolyte for the film. In order to obtain a higher hardness oxide film. We have to master the temperature within ±2℃ for hard anodizing treatment as well.