The characteristics of Fengyue Al-Ti-C ②
Ⅱ. The redundant TiC particles are mostly distributed in the unit cell, which reduces the number of second phases at the grain boundary, reduces the r
read more
The characteristics of Fengyue Al-Ti-C ①
Ⅰ.The sizes of TiC particles are finer, with higher nucleating rate. TiC is composed of two atoms and has a denser crystal structure than TiB 2 . The
read more
The refinement mechanism of Al-Ti-C
Ⅰ. Nucleating particle TiC and its properties: Ⅱ. Refinement mechanism: Refinement of aluminum grains by aluminum titanium carbon is mainly as follows
read more
The basic constitution of Al-Ti-C
Ⅰ. Raw materials: 1)More than 99.85% of high purity and low iron aluminum ingots 2)K2TiF6 (potassium fluotitanate) 3)C (carbon powder) Compared with A
read more
Al-Ti-C development history
1.Origin Al-Ti-C was proposed before Al-Ti-B in the late 1940s and early 1950s and conducted more detailed research. However, due to the poor wettabil
read more
Grain structure of aluminum alloy and its refining technology
For aluminum alloy, grain refinement to obtain fine and uniform equiaxed grain structure plays the following roles: improving the yield strength of th
read more
Talking About The Factors Affecting The Aging Of Aluminum Profiles
The influence of the solution treatment process of industrial aluminum profiles
read more
Principles, Advantages And Disadvantages Of Organic Dyeing And Electrolytic D...
The electrolytic colored film is based on the transparent anodic oxide film produced by the primary electrolysis of sulfuric acid.
read more
Organic Dyeing Has Some Characteristics And Requirements For Oxide Film
1. The oxide film layer must have sufficient porosity
read more
Metal Passivation Problem
The passivation of metal is closely related to electroplating. The special treatment requirements for hard-to-plated materials
read more
Paint Spraying Process For Repairing Metal Wear Parts
Pretreatment is to make the coating film have strong adhesion, not easy to fall off, and long life. The surface of the
read more
Analysis Of The Causes Of Surface Blooming Of Aluminum Profile After Anodic O...
The main reasons for the surface blooming of aluminum profiles after anodizing and dyeing are as follows:
read more
