Principles, Advantages And Disadvantages Of Organic Dyeing And Electrolytic D...
The electrolytic colored film is based on the transparent anodic oxide film produced by the primary electrolysis of sulfuric acid.
read more
Organic Dyeing Has Some Characteristics And Requirements For Oxide Film
1. The oxide film layer must have sufficient porosity
read more
Metal Passivation Problem
The passivation of metal is closely related to electroplating. The special treatment requirements for hard-to-plated materials
read more
Paint Spraying Process For Repairing Metal Wear Parts
Pretreatment is to make the coating film have strong adhesion, not easy to fall off, and long life. The surface of the
read more
Analysis Of The Causes Of Surface Blooming Of Aluminum Profile After Anodic O...
The main reasons for the surface blooming of aluminum profiles after anodizing and dyeing are as follows:
read more
List Of Important Factors For Industrial Aluminum Profile Selection
The selection of industrial aluminum profiles mainly focuses on the following factors:
read more
Causes And Preventive Measures Of Mildew On Aluminum Die Castings
The aluminum die-casting parts stored for a long time have no other problems, but the surface seems to be mildewed.
read more
Eight Advantages Of Aluminum Veneer
The flame retardant function is better, and it meets the requirements of fire protection. The aluminum veneer is
read more
Causes And Solutions Of Aluminum Oxide Powder
There are six types of aluminum oxidation: natural oxidation, electrochemical oxidation, chemical oxidation
read more
Which industries are aluminum anodizing products mainly suitable for?
Which industries are aluminum anodizing products mainly suitable for? There are three types of aluminum
read more
Usage report of Al-Ti-C on 3003 alloy
1. Production specification: 3003 alloy, width 1320, deep drawing, continuous casting thickness 19mm, plate thickness 7mm after over rolling, speed 6.
read more
Corresponding refinement effect of different AlTi5C0.2 holding time
Specifications:AlTi5C0.2 (first grade) Feeding ratio: 2‰ Holding temperature:750℃ Unit:μm Corresponding refinement effect pictures according to the di
read more
